Fire Retardant PVC
PVC Plastic Cable Sheath Material
PVC Plastic Material

90 º C Green Environmental PVC Flame Retardant Cable Sheath Raw Material/T-PV002

Green Environmental Fire Retardant PVC Base on PVC resin,  is PVC flame retardant sheath material made by mixing, plasticizing, and granulating with plasticizers, stabilizers, and other additives.

Categories , ,
Inquiry
Green Environmental Fire Retardant PVC Application
Wire & Cable Sheath/Jacket (wire core working temperature 90 ºC)
Appearance
90 ºC PVC flame retardant sheath material should be made into uniformly sized particles with a particle size of 4mm × 4mm × 3mm. Or ф 4× (2-4) mm. Good plasticization, uniform color, and no obvious impurities.
Color
The color is determined through negotiation between the supply and demand parties.

Fire Retardant PVC Technology Parameters

Technical Analysis
Physical Property
No. Inspection items Standard request Test method Typical value
Technical Index
1 Density  g/cm3 / GB 1033 1.45
2 Tensile strength                     MPa ≥16 GB 1040 18.5
3 Elongation at Break                     % ≥180 GB 1040 240
4 Hot deformation rate (90ºC×4h) % ≤40 GB8815 26
5 Brittle temperature Failed No.≤15/30 GB5470 Pass
Test temperature-25ºC
6 200 ºC static thermal stability       min ≥80 GB8815 88
7 Volume Resistivity at 20ºC           Ω .m ≥1× 109 GB/T 1410 5 × 109
8 Dielectric Strength                       MV/m ≥18 GB/T1408. 1 20
9 Thermal aging property 100±2ºC , 240h
Tensile strength   MPa ≥16 GB1040 19
Max Variation on Tensile Strength % ±20 3
Elongation at break                     % ≥180 220
Max Variation on Elongation at break % ±20 -8.3
10 Thermal aging  quality loss   ºC 100±2 GB/T2951
 h 240
Quality loss  g/m2 ≤15 12
11 Oxygen Index ≥28 GB/T2406 28
Quality of Appearance
1 Appearance Extruded lines Eye survey
are smooth
2 Color Consistent color tone Eye survey
Standard deviation ≤1.5 Colorimeter
*Note:
1  The extruded lines are smooth. And no more than 3 floating points with a diameter ≥1.0mm are allowed within 1 meter. No particles ≥ 3.0mm are allowed.
2  All products shall undergo initial inspection upon startup. Including appearance, color, density, etc.
3  If the first sample test fails, a retest is required. And the result of the second test is the judgment standard.

 

Processing
Using a general extruder for processing, L/D≥20
Adjust appropriately according to the equipment and extrusion status.

 

The following temperature profile of extruder is recommended:
Zone Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Head Die
TemperatureºC 140 145 155 165 170 175 175

Package and Storage

Storage and transport
T-PV 002 should be packaged in moisture-proof packaging. With polyethylene film bags for the inner bag and kraft paper composite bags for the outer bag. With a net weight of (25.0 ± 0.2) kg per bag. Other packaging methods agreed upon by both the seller and the purchaser are allowed.
During the transportation of the product, it should not be damaged by abnormal conditions. Such as sun, rain, and immersion in water. It should be kept clean, dry, not contaminated. And the packaging should be kept intact.
The product should be stored in a clean, cool, dry, and ventilated warehouse, and the storage period should not exceed six months from the date of production.

SEND YOUR MESSAGE TO US: